Product platforms


The MA-series of enclosures has been developed for electrical, electronics, pneumatics and hydraulics installations for the needs of industry.

The design of the enclosures is based on modifiability, functionality and unfailing protection under all circumstances. The quality in constructed in the production line on an item-by-item basis.


  • enclosure rating IP 65
  • plate thickness:
    casing s = 1,5 mm
    door s = 1,5 mm
    mounting plate s = 3,0 mm
    hot galvanized steelplate
  • door opening angle approx. 180° 
  • swing frame opening angle approx. 125 degrees, swing frame available only for the enclosures with width of 600.
  • hinges of stainless steel.
  • latch with wrench.
  • standard colour RAL 7032 custom colours also available.

Serial production available

Ocotec's products are protection-classified cabinets and enclosures, which are delivered in either standard configuration or customized for the customer.

Our product development offers our customers the possibility to combine our sheet metal expertise with product development projects early on, from the drawing table all the way to fully assembled products.
Our products are widely used in different industries. The customizability of the standard enclosure significantly increases the life-cycle of customer-specific solutions.

Kaapit ja kotelot
A welded frame guarantees durability

The sturdy foundation of the enclosure is a welded steel frame. It has proved its durability not only through practical applications, but also during static and dynamic load testing. The protective properties and sturdiness are a result of careful design. The design consists of quick-release panel doors, adjustable bottom, mounting plate and a top panel equipped with lifting eyes.

Vibration test results completed by the Finnish Technical Research Centre of Finland are available upon request (testing methods are in accordance with SFS-EN 60068-2-6 standard, research repo TEL 7167 and TEL 7210).

Versatile use with accessories

With the use of accessories, enclosure applications can be expanded outside of traditional instrumental protection. In order to prevent excess heating, fans, heat exchangers and cooling units are available for enclosures. In addition to our standard program, we offer mechanical solutions tailored for customer needs (e.g. openings, special sizes and materials, stainless steel and aluminum) ODM manufacturing

Kaapit ja kotelot
Comprehensive, uncompromized surface treatment

The base of uncompromizing corrosion resistance is the grease removal, where cold-rolled steel sheets are cleaned. The clean sheet is phosphatized, which creates a layer of iron phosphate on the surface of the metal. This improves the adhesiveness of the paint.
Finally, the enclosures are powder painted. The paint is polymerized in the oven, creating a tough and hard surface, which fulfills clas M4 protection requirements.

Internationally recognized for quality

Ocotec enclosures are almost 100% manufactured in Finland. The enclosures are produced using Finnish raw materials in accordance with established norms. Production precision conforms to general fabrication tolerances SFS 5803. Sizing conforms to standards SFS 2528 and SFS-EN 60529.

Found a product that fulfills your needs?

Get in touch and we will confirm the applicability
or build a custom solution for you.